BDS5A-106-00010\405A2-030 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen BDS5A-106-00010\405A2-030 is part of the BDS Industrial Servo Drives series and features a voltage rating of 115 VAC with a maximum main DC bus voltage of 225 VDC. It has a continuous output current of 6.0 amps, peak output current of 12.0 amps, and supports RS-232 communication as well as encoder input. The drive includes 32 I/O capacity and a resolver with 8 arc minute accuracy and 12-bit resolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BDS5A-106-00010\405A2-030 is a single-axis digital drive manufactured by Kollmorgen for the BDS Industrial Servo Drives series. It accepts a utility power supply and regulates current to operate brushless servo motors in automated machinery. Through its RS-232 communication interface, configuration software can upload parameters, log faults, and execute test moves without removing the unit from the cabinet.
The drive delivers a continuous output current of 6.0 A while sustaining 1.2 kVA of apparent power, allowing motors connected to modest-inertia loads to remain within thermal limits during continuous production. A current ripple frequency of 20.0 kHz keeps torque pulsations below the mechanical resonance of most transmission systems. Up to 32 I/O points allow direct wiring of limit switches, interlocks, and run-enable signals, reducing the need for external terminal blocks. The main DC bus can reach 225 VDC, providing voltage capacity for rapid acceleration. The form factor is rated at no more than 1.01, indicating that the RMS and average currents are nearly identical and helping minimize additional copper loss. Internal heat dissipation is rated at 40 watts, and the encoder input channel supports incremental feedback for precise closed-loop control.
During short bursts, the control section supplies a peak output current of 12.0 A, enabling fast index moves without exceeding semiconductor limits. Power devices operate at a PWM switching frequency of 10.0 kHz, balancing acoustic noise with switching loss. Resolver feedback can be used instead of encoder feedback. The resolver is excited at 8.5 kHz and decoded with 12-bit, 4,096-count resolution while maintaining an accuracy of 8 arc-minutes. The drive operates from a nominal line voltage of 115 VAC and has a compact width of 76 mm, allowing installation in crowded control panels.
