BDS3-230/12-01-207-206B43 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The BDS3-230/12-01-207-206B43 is a brushless sine wave drive from Kollmorgen, part of the BDS Industrial Servo Drives series. It features a continuous current of 12 ARMS per phase and a four-quadrant bidirectional velocity loop. This model includes a pigtail harness, bus bars, and a standard fan-cooled 4 inch module with a 14-bit R/d converter resolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BDS3-230/12-01-207-206B43 is a servo drive module from Kollmorgen that belongs to the BDS Industrial Servo Drives series. Designed for use with brushless AC permanent-magnet synchronous motors, the unit supplies regulated three-phase power and executes velocity and torque commands from the motion controller. In automated lines, it provides closed-loop control so that pick-and-place heads, conveyors, and process actuators reach commanded speeds without excessive overshoot. This control capability supports applications that require repeatable motion while operating under changing mechanical loads.
Its continuous current capability is 12 A RMS per phase, matching mid-frame motors that demand steady torque at low speeds. A bidirectional velocity loop governs acceleration and deceleration, enabling regenerative braking in both directions. The internal power stage produces a brushless drive sine-wave output so that motor inductance is used efficiently and audible noise is reduced. Line voltage is converted to a motor terminal voltage of 230 VAC line-to-line RMS, providing adequate headroom for 230-volt-class windings. The drive supports four-quadrant operation, allowing it to source or sink current and return excess energy to the DC bus during overhauling loads. These functions maintain stable speed regulation when the connected motor encounters varying torque demands during a production cycle.
The control electronics are protected by a 1.5 A MDL fuse rated for 115 VAC, which disconnects auxiliary power under fault conditions. Field wiring can be isolated through a contact rated for 115 VAC at 2 A for drive-enable interlocks. Thermal management relies on a standard fan-cooled 4-inch module that directs airflow across the heat sinks, helping the power stage remain within its operating temperature limits. Feedback resolution in the digital loop is enhanced by a 14-bit resolver-to-digital converter, allowing fine speed measurement at low rotational speeds. The pigtail harness and bus bar option package reduces the length and complexity of cabinet wiring runs. Its standardized mechanical layout also allows multiple axes to be stacked efficiently in a shared enclosure while preserving access to connections and cooling paths.
