Product Description:

The AKM2G-74P-ANJNCA00 servo motor is manufactured by Kollmorgen and belongs to the AKM2G Magnetic Motors series. It provides controlled torque and speed for automated axes in assembly cells, pick-and-place gantries, and small machining centers. By integrating a high-density stator with a low-inertia rotor, it gives drives the quick response required for modern motion profiles. This behavior is useful on axes that must accelerate and settle quickly between short moves without excessive lag. The design also supports frequent reversing motion in compact machines where responsive control is important.

The motor’s single-cable interface terminates in an htec Connector M40, and the shell around that plug carries a protection rating of IP65, which helps block dust and routine washdown splash. A frame diameter of 192 mm sets the overall footprint, and the rotor uses build length 4 to raise continuous torque without changing the flange outline. The output uses a smooth shaft, so couplings clamp directly to the journal rather than relying on keys, which supports simple connection to common transmission elements. Temperature supervision is provided by a PT-1000 + PTC combination that sends winding data to the drive, while the motor operates in ambient temperatures from 5 °C to 40 °C and is supplied without a holding brake as a standard configuration.

The position loop is closed by the SFD3 Smart Feedback Device Gen. 3, which sends high-resolution magnetic angle data and digital motor nameplate data through the same power cable. Mounting uses an IEC flange with accuracy N, allowing the motor to fit machine layouts prepared for common IEC motor interfaces when higher dynamic performance is needed. The stator uses standard winding P, which balances voltage, current, and thermal rise for typical 230/400 V servo inverters. The stator varnish and seals tolerate operation at up to 95% relative humidity, supporting use in damp indoor industrial environments during daily production.