Product Description:

The AKM2G-73Q-ANJNCA00 is a servo motor produced by Kollmorgen in the AKM2G Magnetic Motors series. It is intended for closed-loop motion tasks such as indexing tables, pick-and-place actuators, and packaging spindles. By converting drive current into controlled rotary torque, the motor enables precise speed regulation and repeatable positioning in automated equipment. Its electromagnetic design pairs with Kollmorgen drives to support dynamic acceleration while minimizing cogging.

The electrical interface is routed through an htec Connector M40, and the mating hardware maintains IP65 sealing against dust and washdown spray. Rotor position is reported by a SFD3 Smart Feedback Device Gen. 3, allowing high-bandwidth commutation without a separate encoder cable. Mechanically, the motor occupies a 192 mm frame size, giving ample stator volume for elevated torque density. Its output end uses a smooth shaft, which reduces assembly time where clamping hubs or shrink discs are preferred over keyed couplings. Continuous operation is specified within 5–40 °C ambient, ensuring that winding insulation and bearing grease stay within design limits. As the model is supplied without a holding brake, stopping torque must be provided by the drive or an external lock when power is removed.

A permitted humidity level of 95% relative humidity allows the motor to run in damp production areas provided condensation is avoided. Winding temperature is tracked by the integrated PT-1000 + PTC sensor pair, giving the drive both linear thermal data and a rapid over-temperature trip. Mounting follows the IEC with accuracy N flange design so the unit aligns with standard gearheads and reducers. Rotor length code 3 moderates inertia for mid-range dynamics, and the customization option is listed as standard, meaning no special mechanical or electrical deviations are present.