Product Description:

The AKM2G-73L-ANDNCA00 belongs to the AKM2G Magnetic Motors series from Kollmorgen. It is a servo motor intended for precise position and velocity control in industrial automation cells, packaging machinery, and coordinated multi-axis assemblies. By combining rare-earth magnetic materials with tight mechanical tolerances, the motor delivers high torque density while remaining compatible with standard IEC mounting patterns used across matching drive systems. The housing is suited to machine designs that require compact servo axes with high dynamic response.

The motor operates safely between 5–40 °C, allowing direct cabinet installation without auxiliary heating or cooling. Its single-cable interface terminates on a 1 htec M23 connector that is sealed to IP65, so airborne dust and low-pressure water jets do not compromise the contacts. This arrangement reduces external cabling and keeps the motor connection compact. A frame diameter of 192 mm accommodates the series’ larger stator laminations, which helps increase continuous torque compared with smaller AKM2G units. The mounting flange follows the IEC with accuracy N standard, giving predictable pilot concentricity when aligning gearheads or machine housings. Rotor length 3 extends the active magnetic path without increasing the frame size, and the motor comes without a brake to reduce inertia during dynamic point-to-point moves.

Signal resolution and commutation are handled by the SFD3 Smart Feedback Device Gen. 3, which streams digital position data directly to Kollmorgen current-loop electronics. Internal winding protection relies on a PT-1000 + PTC pair; the resistance element tracks continuous temperature while the PTC initiates shutdown during abnormal overload events. The drive can use this feedback and thermal data to monitor rotor position and winding temperature during continuous duty. Operation remains stable up to 95% relative humidity, making the motor suitable for condensation-free washdown areas. A smooth shaft simplifies coupling to low-backlash clamps or shrink-fit hubs. The standard customization code indicates a standard winding, coating, and connector configuration.