Product Description:

The AKM2G-72N-ANDNCA00 is a servo motor manufactured by Kollmorgen and supplied within the AKM2G Magnetic Motors series. As a brushless rotary unit, it delivers closed-loop torque that drives automated pick-and-place heads, metering pumps, and coordinated multi-axis stages. Its purpose in an automation cell is to provide precise positioning while keeping size and wiring consistent with IEC mounting practices. The brushless design supports smooth response during frequent acceleration and deceleration in repetitive motion tasks.

The motor’s single-cable interface is protected to IP65, so the housing resists dust ingress and water jets during routine washdowns. Power and feedback are routed through an HTEC M23 connector, reducing panel space and simplifying cable management. Safe operation is specified between 5–40 °C, which matches typical control cabinet climates, and the windings tolerate up to 95% relative humidity without condensation. An IEC flange with accuracy grade N allows direct replacement of legacy motors that share the same pilot diameter and bolt circle. The unit ships without a holding brake, so an external locking device is required when load holding is needed, and the customization code is Standard, meaning no special shaft seals or coatings are applied.

For high-resolution commutation, the drive reads an SFD3 Smart Feedback Device Gen. 3 embedded in the stator. The frame diameter measures 192 mm, giving room for a larger coil area while remaining compatible with compact machinery. Thermal monitoring uses a PT1000 and PTC sensor pair, enabling the controller to react before insulation limits are reached. This feedback and sensing arrangement helps the drive maintain stable control during rapid speed changes and varying load conditions. A smooth shaft simplifies coupling to backlash-free clamp hubs, and rotor length code 2 balances inertia with peak torque to suit mid-range indexing speeds.