Product Description:

The AKM2G-72L-ANDNCA00 is a servo motor produced by Kollmorgen as part of the AKM2G Magnetic Motors series. In automated machinery, it converts commanded drive current into rotational motion for positioning, conveying, or coordinated axes that require tight velocity and torque control. This model follows the series standard customization code, uses rotor length 2, and mounts with an IEC flange so it can fit existing mechanical layouts without adapter plates.

The motor operates within an ambient range of 5–40 °C, so cabinet ventilation must keep internal air within that window to avoid derating. Its connector housing is sealed to IP65, blocking dust ingress and direct water jets, which supports installation in washdown areas when the rest of the machine interface is matched to the application. A frame size of 192 mm provides the magnetic volume needed for continuous torque while still fitting common gearboxes. Position and velocity are monitored by a SFD3 Smart Feedback Device Gen. 3, and this single-cable encoder carries absolute position data together with the drive connection to reduce wiring bulk. The mounting face uses an IEC flange with accuracy class N, so pilot diameters and bolt circles follow standardized concentricity limits for repeatable alignment between the motor and the load.

During operation, the winding insulation tolerates up to 95% relative humidity without condensation, so the motor can run in humid process areas when temperature remains stable. A dual-element thermal network with a PT-1000 + PTC sensor pair sends winding temperature data to the drive so protective action can occur before overheating develops. Power and feedback leave the housing through a single 1 htec M23 connector that locks with a quarter turn. Torque is transmitted through a smooth shaft, and the motor is supplied without a holding brake, so external restraint is required when the axis must remain stationary under load.