Product Description:

The AKM2G-65N-ANDNCA00 belongs to Kollmorgen’s AKM2G Magnetic Motors series and is supplied as a servo motor for precise position and velocity control in automated machinery. By combining magnetic motor technology with compact electromechanics, the unit converts drive current into continuous rotary motion for indexing tables, pick-and-place axes, and other closed-loop tasks within industrial automation cells. Standard customization status means no special windings or seals were added.

For environmental compatibility, the motor can operate at ambient temperatures from 5–40 °C, and its single-cable connector has an ingress rating of IP65 to block dust and water jets. The output terminals are housed in a 1 htec M23 connector so that power, feedback, and protective earth conductors terminate in a standardized circular plug. Winding temperature is monitored by a dual sensor set of PT-1000 + PTC, which lets the drive reduce current if copper temperature rises toward the insulation limit. A frame diameter of 142 mm sets the bolt circle on the mounting face, while rotor length code 5 increases magnetic active length for higher continuous torque without changing the external footprint.

Motion feedback is generated by the integrated SFD3 Smart Feedback Device Gen. 3, enabling single-cable commutation, position tracking, and electronic nameplate data exchange with Kollmorgen drive amplifiers. During production shifts, the stator windings remain stable even when the surrounding air reaches 95% relative humidity, provided condensation is avoided. Mechanical attachment uses an IEC flange with accuracy N, supporting precise concentricity in gearheads or couplings. The shaft exits the housing as a smooth cylinder for clearance-fit components, and the design is delivered without a brake, making it suitable for applications that rely on servo motor holding torque or external clamping mechanisms at standstill.