Product Description:

The AKM2G-62M-ANDNCA00 is a servo motor manufactured by Kollmorgen and part of the AKM2G Magnetic Motors series. It functions as an electromechanical actuator that works with a matched drive to deliver accurate speed and position control in automated assembly, packaging, and material-handling equipment. Because it uses permanent-magnet synchronous technology, the motor provides high torque density while maintaining the dynamic response needed for short cycle duties. This makes it suitable for motion systems that require repeatable acceleration, controlled deceleration, and stable positioning during frequent start-and-stop operation.

The connector housing meets protection class IP65, shielding signal and power contacts from dust ingress and water jets during routine washdowns. A single HTEC M23 connector combines phase, feedback, and earth conductors, which simplifies cable routing and reduces the number of external connection points. Rotor position is captured by the integrated SFD3 Smart Feedback Device Gen. 3, allowing the connected drive to identify motor data automatically at startup. The motor uses a 142 mm frame, which helps balance installation space and continuous torque output. It is intended for ambient conditions from 5 to 40 °C and up to 95% relative humidity, so it should be used where heat and moisture remain within those limits.

The motor is supplied without a brake, so any holding function must come from external hardware when the axis must remain fixed after power is removed. Internal temperature monitoring uses a dual-sensor arrangement of PT-1000 + PTC, giving the control system both measured thermal data and a direct overtemperature response. The front face uses an IEC flange with accuracy grade N, which supports alignment with compatible gearboxes and couplings. It also has a smooth shaft in a standard configuration, making it suitable for applications that rely on clamp-style hubs or other non-keyed connections.