Product Description:

The AKM2G-62L-ANDNCA00 is a servo motor produced by Kollmorgen within the AKM2G Magnetic Motors series. As a rotary actuator, it converts drive current into controlled torque and speed for positioning tasks in automated machinery, allowing compact motion systems to be used in pick-and-place units, conveyors, and indexing tables. Its servo design supports repeatable motion on axes that must start, stop, and reverse direction with controlled response during normal machine operation.

The connection end of the motor is equipped with a smooth shaft that mates directly with precision couplings. The mounting interface uses an IEC flange with accuracy N pattern for alignment with standardized gearheads and machine plates. A sealed mating area rated at IP65 protects the single-cable M23 connector from dust and low-pressure water, while the contacts carry power, feedback, and thermal signals. Position data is provided by the SFD3 Smart Feedback Device Gen. 3, which supports high-resolution commutation without a separate encoder. Internal winding temperature is monitored by a PT-1000 + PTC sensor pair so the drive can reduce current before insulation limits are reached. Because the motor is supplied without a holding brake, the load side must provide holding force when power is removed. The shaft seal and connector angle remain at the standard customization level for this motor type.

The motor operates in ambient temperatures of 5–40 °C and at up to 95 % relative humidity, which suits typical indoor industrial conditions. Its housing fits the 142 mm frame class, giving a compact footprint for its output range and helping it fit into space-limited machine layouts. A rotor length 2 design increases active copper volume without enlarging the flange square. This layout supports steady torque production while keeping the motor envelope suitable for tightly arranged automation equipment.