Product Description:

The AKM2G-53M-ANDNCA00 is a servo motor produced by Kollmorgen within the AKM2G Magnetic Motors series. This motor is intended for precision positioning and velocity control in industrial automation lines, where fast response and compact dimensions support multi-axis machinery. By combining permanent-magnet technology with tight mechanical tolerances, it converts electrical drive commands into repeatable rotary motion for conveyors, pick-and-place heads, and packaging spindles. Its compact format also suits machines that place several motion axes close together without giving up responsive control. That behavior is useful on index tables and transfer systems that need frequent starts, stops, and reversals across short cycle times.

Its rated operating environment spans 5 to 40 °C, so surrounding air must keep the housing within that range during use. Power and feedback exit through a sealed IP65 connector, and the designated interface is a single M23 connector that simplifies cable routing while resisting oil and dust. Closed-loop commutation is managed by the SFD3 Smart Feedback Device Gen. 3, which provides high-resolution position data directly to compatible Kollmorgen drives for stable speed and position control. The motor face uses an IEC flange with accuracy N for direct attachment to gearboxes or machine mounts without added alignment sleeves. The motor has a frame diameter of 114 mm, which provides more stator space than smaller AKM2G variants. The design is supplied without a holding brake, so static load retention must be handled by the drive or by external clamping when the axis is stopped.

During continuous duty, the winding insulation tolerates up to 95% relative humidity when condensation is prevented. A smooth shaft suits clamp or collet couplings, while rotor length 3 balances inertia and peak torque for mid-range load profiles. Embedded PT-1000 + PTC sensors send temperature and over-temperature signals to the controller for layered thermal protection during changing load conditions. Using both sensor types allows the controller to track normal heating trends and react quickly if the winding temperature rises too far. This model is delivered in standard customization, so no special coatings or special windings are included.