AKM2G-53L-ANDNCA00

Product Description:

This Kollmorgen AKM2G-53L-ANDNCA00 synchronous servomotor must be protected from unacceptable stresses during the flange mounting operation. The motor pickup isn’t allowed by using the shaft. This product should have no axial load on the shaft if possible. The device must comply with the permissible force limits. This unit might generate electric arcs that can cause harm or damage in unfavorable circumstances. Its assembly is permitted only by people with knowledge of electrical engineering. This motor’s leads tend to be live briefly even if the shaft is not rotating.

The product’s DC link voltage must be checked to ensure that it has dropped below 60 VDC before its handling after its use. This device’s ground connection helps in suppressing HF interference. The unit’s voltage and current ratings must match those of its servo drive. Its wiring diagram is available in the manual of the servo amplifier. Its feedback cable has less than 120 pF/m capacitance. The motor’s power and feedback connections are made with the manufacturer’s shielded and preassembled cables. This product’s setup is done after checking for proper earthing and correct seating of the drive elements. The device and the drive have to be commissioned separately in multi-axis systems. This unit’s cables must be changed if they are crushed or broken. Its phasing must be checked for proper sequence if the motor tends to run away.

The synchronous servomotor can produce rated torque indefinitely at the rated speed in S1 continuous operation mode. This product’s peak current is based on its winding. The device’s surface temperature has to be less than 40 °C when it is touched. This unit has no customization. It has Class F insulation.