Product Description:

The AKM2G-52H-ANDNCA00 is a servo motor produced by Kollmorgen as part of the AKM2G Magnetic Motors series. It is intended for closed-loop motion tasks where compact size and precise torque regulation are required on packaging lines, pick-and-place assemblies, and similar machinery. When paired with a compatible drive, the unit converts controller commands into controlled rotary movement for industrial axes.

The single-cable interface uses a 1 htec M23 connector that carries power, signals, and grounding. The housing has IP65 protection, so sealed gaskets block dust and low-pressure water spray inside factory cells. Motor commutation and position are resolved by the integrated SFD3 Smart Feedback Device Gen. 3, which eliminates separate resolvers and simplifies wiring while delivering high-resolution feedback to the drive. Heat rise is monitored by a PT-1000 + PTC sensor pair that allows the controller to reduce current before winding temperature rises too far. A frame diameter of 114 mm provides the mounting footprint and accommodates a stator and rotor assembly sized for medium-torque applications. Rotor length code 2 indicates the second longitudinal build option in this motor frame, and standard customization means the motor uses default mechanical features and electrical pinouts.

The motor can operate at up to 95% relative humidity when condensation is avoided, and the operating temperature range of 5–40 °C matches typical equipment rooms and control enclosures. The output end uses a smooth shaft to mate with clamps or couplings that rely on frictional grip rather than keys. Mounting follows a flange built to IEC with accuracy N, which supports interchangeability with standardized gearboxes and load adapters. The motor is supplied without a holding brake, so static position must be maintained by external locking or drive torque.