Product Description:

The AKM2G-44J-ANDNCA00 is a servo motor manufactured by Kollmorgen as part of the AKM2G Magnetic Motors series. This permanent-magnet unit is used on closed-loop motion axes where fast torque response and accurate velocity control are required. When paired with a matched drive, it converts three-phase electrical input into finely regulated rotary output for pick-and-place modules, indexing tables, and compact packaging stations. Its low-inertia electromagnetic design supports smooth commutation and quick speed changes across short motion cycles, helping the machine maintain repeatable positioning under varying load conditions.

The motor uses an IEC face-mount pattern with accuracy class N, and its housing has a frame diameter of 88 mm with rotor length code 4 to provide moderate torque density without excessive stack height. Power and feedback cables terminate on a single HTEC M23 hybrid connector sealed to IP65, which helps block dust and low-pressure water jets during machine operation. Continuous operation is permitted in ambient temperatures from 5–40 °C, and thermal supervision is handled by a dual-element PT-1000 + PTC sensor embedded in the windings. The motor is supplied in the standard customization form, so it does not require special mechanical changes.

Position and speed data are provided by the SFD3 Smart Feedback Device Gen. 3, which supports single-cable communication of high-resolution rotor information and electronic nameplate functions for simpler startup. The motor uses a smooth shaft, allowing direct connection to clamp couplings or compatible gearheads without a keyed interface. During operation, the unit can tolerate up to 95% relative humidity as long as condensation is avoided. It is supplied without brake, so any load-holding function must be handled by external mechanics or drive-generated torque.