Product Description:

The AKM2G-43I-ANDNCA00 is a servo motor manufactured by Kollmorgen in the AKM2G Magnetic Motors series. This product type delivers precise torque and position control for automated axes such as pick-and-place heads, indexing tables, or coordinated conveyors, where repeatable motion and fast response are required. It ships under the manufacturer's standard customization level, so the mechanical and electrical features described here are supplied as a standard configuration rather than as special-order modifications.

For electrical interfacing, the motor carries a sealed receptacle rated at IP65, so the mated connector blocks dust ingress and water jets during normal machine operation. The plug style is 1 htec M23, a circular connector that carries three-phase power, feedback, and thermal leads through one coupler to reduce external cable complexity. Rotor position is resolved by the SFD3 Smart Feedback Device Gen. 3, enabling high-bandwidth current loops without an external encoder. Accurate registration to gearboxes or machine frames is established by an IEC flange with accuracy class N, which keeps the pilot diameter within standardized tolerances. Overall width is constrained by an 88 mm frame, allowing the unit to fit in tight multi-axis assemblies. The motor is supplied without a brake, so holding torque must be provided by the drive or external mechanics when power is removed.

Operation is permitted between 5 and 40 °C and up to 95% relative humidity, which suits enclosed machine spaces where airborne moisture may rise during normal production. A smooth shaft reduces seal wear and avoids keyway stress in high-speed couplings, while the balanced rotor length 3 design adds active iron without increasing the mounting footprint. Internal heat is monitored by a PT-1000 + PTC pair that provides both linear temperature data and over-temperature switching for layered thermal protection.