Product Description:

The AKM2G-41G-ANDNCA00 is a servo motor produced by Kollmorgen for the AKM2G Magnetic Motors series. It targets closed-loop motion axes where precise torque and speed regulation are required in industrial automation cells. This type of motor is commonly used on axes that require repeatable starts, stops, and position corrections during normal cycle operation. When paired with a compatible drive controller, it converts electrical energy into controlled mechanical rotation for indexing tables, pick-and-place heads, and packaging actuators. The motor uses a standardized platform with shared mechanical interfaces across frame sizes, which supports consistent installation in compact motion systems.

Its connector and operating limits suit typical production environments in automated equipment. The connector assembly carries a IP65 protection class, so dust ingress and low-pressure water jets do not compromise signal continuity. Power and feedback leave the housing through a single 1 htec M23 connector, simplifying cable routing when the motor is mounted in tight enclosures. Continuous duty is supported within an ambient range of 5–40 °C, allowing installation inside climate-controlled cabinets or directly on equipment frames. The motor body corresponds to a 88 mm frame size, providing a balance between torque density and footprint for mid-range axis loads. Rotor position is resolved by the integrated SFD3 Smart Feedback Device Gen. 3, enabling high-resolution commutation without an external encoder.

The mechanical output uses a smooth shaft, so couplings or pulleys mount without a keyway. Thermal monitoring uses a PT-1000 + PTC sensor pair that relays winding temperature to the drive for real-time derating. Operation remains stable at up to 95% relative humidity, which supports installations in humid filling or washdown areas when the connector seal remains intact. The motor attaches through an IEC flange with accuracy N, matching standard gearboxes and common mounting patterns. This variant is supplied without a holding brake, uses rotor length 1, and comes in the standard customization level.