Product Description:

The AKM2G-41D-ANDNCA00 servo motor is produced by Kollmorgen within the AKM2G Magnetic Motors series. It serves as an electromechanical actuator that delivers commanded speed and torque to automated machinery such as pick-and-place gantries, small conveyors, and packaging tools. The design follows a standard customization profile, employs rotor length 1 to maintain moderate inertia, and presents a smooth shaft for direct coupling to precision gear stages.

Electrical connection is handled through an HTEC M23 circular connector whose sealing hardware carries a protection class of IP65; this rating blocks dust ingress and low-pressure water jets so the motor can be mounted outside of enclosures. Position and velocity feedback are provided by the integrated SFD3 Smart Feedback Device Gen. 3, enabling single-cable operation and direct feedback exchange with compatible drives. The stator housing seats against an IEC flange with accuracy N, giving dimensional interchangeability with common gearboxes and actuation plates. Because the mechanical assembly is supplied without a holding brake, applications that must lock an axis at power-off need an external brake or a torque-holding drive mode.

Frame width is 88 mm, so the motor fits equipment that restricts cross-section while still allowing a stator stack long enough for usable power. Acceptable ambient temperature spans 5–40 °C; within this interval the winding insulation sustains rated losses without derating. Operation remains reliable at up to 95% relative humidity, which minimizes condensation risk only when the temperature stays above the dew point. Internal thermal monitoring uses a dual-element sensor package of PT-1000 + PTC, giving the drive both linear temperature feedback for performance scaling and a discrete trip signal for emergency shutdown.