Product Description:

The AKM2G-33H-ANDNCA00 is a servo motor manufactured by Kollmorgen as part of the AKM2G Magnetic Motors series. Designed for integration into multi-axis positioning stages, pick-and-place heads, and similar motion assemblies, the unit converts drive currents from a matching amplifier into controlled rotary motion that can be synchronized with encoder feedback. Its compact construction and magnetic circuit allow high torque density while maintaining compatibility with common IEC mechanical interfaces used across industrial automation lines.

Operational boundaries start with an ambient temperature window of 5 to 40 °C, allowing the motor to run in enclosed machines without forced cooling. Power and signal connections use one HTEC M23 connector, and the mating plug has an enclosure rating of IP65, so dust ingress and water jets will not affect the contacts. A frame width of 72 mm positions the stator within narrow mechanical envelopes, while the integrated SFD3 Smart Feedback Device Gen. 3 supplies high-resolution rotor position data over the same lead to simplify wiring. Standard construction is specified in the customization field, and rotor length code 3 balances inertia with continuous torque capability. The motor is supplied without a holding brake, so external holding measures are required when power is off.

The motor can operate at up to 95% relative humidity, allowing use in humid production areas as long as condensation is avoided. Mounting uses an IEC flange with accuracy N, which helps maintain concentric alignment against gearboxes or direct-drive loads. A smooth shaft simplifies coupling to low-backlash clamps and avoids the keyway stress risers that can develop under cyclic torque. Internal thermal monitoring relies on a PT-1000 + PTC sensor pair, allowing the drive to track winding temperature in real time and issue derating or shutdown commands before insulation limits are reached.