Product Description:

The AKM2G-32G-ANDNCA00 is a servo motor manufactured by Kollmorgen and belongs to the AKM2G Magnetic Motors series. In industrial automation, the unit translates commanded current from a servo drive into controlled torque and speed for packaging, assembly, and material-handling axes. Its compact design suits applications where precise rotary positioning and repeatable velocity tracking are required.

The motor’s power and signal interface uses a rear-mounted 1 HTEC M23 connector. When mated, it achieves IP65 protection at the connector, which helps prevent dust ingress and low-pressure water jets from reaching the connection point. Inside the housing, an encoder identified as SFD3 Smart Feedback Device Gen. 3 supplies high-resolution position data for closed-loop control. The motor has a frame width of 72 mm, which gives it a compact cross-section for machines with limited clearance. It operates in ambient temperatures from 5 to 40 °C, and rotor length code 2 provides higher torque for this frame size while keeping inertia manageable. The unit comes with standard customization and is supplied without a holding brake, so static load retention must be provided by the drive or by external mechanics.

The mounting interface follows the IEC with accuracy N flange pattern, allowing direct attachment to gearboxes or machine plates. During operation, the motor can tolerate ambient moisture up to 95% relative humidity. Internal temperature monitoring is handled by a PT-1000 + PTC sensor combination, allowing the drive to reduce current if the winding temperature rises. Mechanical power is delivered through a smooth shaft, which avoids keyway stress concentrations and supports clamp or compression couplings. This shaft style is suited to installations that rely on friction-based hubs for torque transmission.