AKM2G-32E-ANDNCA00
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The AKM2G-32E-ANDNCA00, a product of Kollmorgen's AKM2G Magnetic Motors series, features a frame size of 32 and an E stack length. This motor delivers up to 1.4 Nm rated torque and supports speeds up to 8000 rpm. It employs natural convection cooling and adheres to an IP65 rating for enhanced protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
AKM2G-32E-ANDNCA00 is a servo motor. It is a product of Kollmorgen, a company that specializes in motion control systems, particularly for applications that require high precision, reliability, and performance. This motor is part of the AKM2G series. This motor series provides 30% torque increase, allowing operators to achieve performance improvements without a corresponding increase in motor size. The series offers multiple feedback options, connector, shaft and mounting options, and a holding brake option for operators. AKM2G-32E-ANDNCA00 is a motor with a 72 millimeter flange. The motor shaft is smooth. An M23 rotatable connector is the connection point for a single cable that carries power and feedback. This motor is without a holding brake. The feedback device on the motor is a Smart Feedback 3rd generation singleturn sensor with 24 bit resolution.
Thermal sensor on the motor is PT-1000+PTC. The PT-1000 is a Platinum Resistance Temperature Detector, which is a precise temperature sensor made of platinum that changes resistance with temperature. It has a resistance of 1000 ohms at 0°C. PTC refers to Positive Temperature Coefficient thermistor, which is a thermal resistor that increases resistance sharply as temperature rises. It is used for overtemperature protection. Continuous stall torque for the AKM2G-32E-ANDNCA00 motor is 2.9 Nm. The rated speed is 7600 RPM and the rotor inertia is 0.8130 kg cm2. Length of the motor is 153 millimeters. The shaft diameter is 19 millimeters. Length of the shaft is approximately 30 millimeters. Diameter of mounting holes on the shaft is 5.5 millimeters. Kollmorgen motors are optimized for speed control applications. As servo motors, they must be used with a servo controller. Only qualified technical personnel should operate the motor.
Frequently Asked Questions about AKM2G-32E-ANDNCA00:
Q: What is the shaft design?
A: The motor has a plain shaft.
Q: Is a holding brake installed on the motor?
A: The motor is without a holding brake.
Q: Is a thermal sensor installed on the motor?
A: A thermal sensor is installed on the motor.
Q: What is the flange size?
A: The flange size is 72 millimeters.
Q: Which connector is available on the motor?
A: An M23 connector is available on the motor.
