Product Description:

The AKM2G-32D-ANDNCA00 is a servo motor manufactured by Kollmorgen within the AKM2G Magnetic Motors series. In automated assembly lines and material-handling stations, this motor delivers closed-loop torque and speed so synchronized axes can follow programmed motion profiles during transfer, indexing, and positioning tasks. The design uses an IEC flange pattern with accuracy grade N, allowing the housing to mount directly to gearboxes or load plates without adapter rings. A standard customization code means the motor follows the baseline configuration for this model, which keeps the electrical and mechanical layout consistent.

The housing is sealed to IP65, keeping dust and water jets away from the stator windings during washdown or coolant splash exposure. Power and feedback travel through a single htec M23 connector, so installation requires only one circular plug instead of separate terminals. Reliable operation is supported across 5–40 °C ambient temperatures and up to 95% relative humidity, allowing use in humid factory areas when condensation does not form. The motor frame diameter of 72 mm sets the outside envelope, while the IEC flange helps maintain coaxial alignment with driven loads and supports proper radial bearing loading in compact equipment layouts.

A smooth shaft couples the rotor directly to pulleys or couplings without a key, which helps reduce backlash in precision indexing applications. Internal winding protection relies on a PT-1000 + PTC sensor pair that reports temperature to the drive so overheating can be detected before insulation stress becomes excessive. Position and velocity loops close through the SFD3 Smart Feedback Device Gen. 3, which provides high-resolution digital feedback without requiring batteries. Because the unit is supplied without a brake, holding torque must be provided by the drive or by external mechanics when power is removed. Rotor length code 2 keeps inertia moderate for responsive motion on medium-duty axes.