AKM2G-24F-ANDNCA00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKM2G-24F-ANDNCA00 is a servo motor from the AKM2G Magnetic Motors series featuring a 58 mm frame size and smooth shaft design. It comes with an IEC flange with accuracy N and uses the SFD3 Smart Feedback Device Gen. 3 for feedback. The connector is a 1 htec M23 type and rated at IP65 protection, and the motor can operate in environments with up to 95% relative humidity and temperatures between 5 and 40°C.
Internal Product Review
The AKM2G-24F-ANDNCA00 is a Kollmorgen servo motor built for precise motion control and dependable integration. SFD3 Smart Feedback Device Gen. 3 and a PT-1000 + PTC thermal sensor support accurate feedback and consistent thermal monitoring. IP65 connector protection with an htec M23 connection makes the motor a strong choice for clean, reliable servo performance.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKM2G-24F-ANDNCA00 is a servo motor manufactured by Kollmorgen within the AKM2G Magnetic Motors series. It is intended for positioning and velocity control tasks in automated machinery where compact direct-drive actuators improve throughput and accuracy. The motor is supplied in a standard configuration without an internal holding brake, so any load that must remain fixed after power removal requires an external mechanical retention method. This arrangement is often useful on compact axes where added brake mass is not required.
A mechanical frame size of 58 mm keeps the motor narrow enough for multi-axis assemblies, while rotor length code 4 increases stack height to raise torque density without changing the mounting footprint. The output uses a smooth shaft, which is suitable for couplers or pulley hubs that do not require keyways. Mounting uses an IEC flange with accuracy N, supporting alignment with common gearheads and linear stages. Electrical connections are routed through a single htec M23 connector that carries power, feedback, and thermal conductors, and the interface maintains IP65 protection when the mating plug is secured. Using one connector for these circuits can help keep cable routing compact on crowded machine frames.
The motor is intended to operate in ambient temperatures from 5–40 °C and can tolerate up to 95% relative humidity without condensation. Rotor position and velocity are handled by the SFD3 Smart Feedback Device Gen. 3, which provides digital multiturn data to compatible drives and removes the need for a separate external encoder assembly. The windings are monitored by a PT-1000 + PTC sensor pair so the drive can detect rising temperature in real time and respond before thermal overload develops. Non-condensing operation also helps protect the feedback electronics and internal insulation during continuous factory use.
