Product Description:

The AKM2G-24D-ANDNCA00 is a servo motor produced by Kollmorgen within the AKM2G Magnetic Motors series. As a rotary actuator, it integrates with drives and motion controllers to position tooling, conveyors, and pick-and-place axes with repeatable accuracy in automated equipment. The motor’s compact frame and encoder feedback allow precise closed-loop regulation of velocity and angle under varying load conditions.

This model uses a sealed connector interface; power and signal lines exit through a 1 htec M23 connector that carries both motor phases and feedback conductors. The connector housing and the mating face meet the IP65 protection class, preventing dust ingress and low-pressure water jets from affecting operation on the factory floor. Position data is supplied by the SFD3 Smart Feedback Device Gen. 3, giving digital commutation and high-resolution speed reporting to the drive. The mounting face follows the IEC flange with accuracy N, so it mates directly to gearheads or machine frames without alignment sleeves. A compact 58 mm motor frame and rotor length code 4 reduce mass while still delivering the rated torque. Customization is standard, so the motor uses standard mechanical dimensions and winding constants. The allowable ambient operating temperature spans 5 to 40 °C, matching most control cabinet and open-frame machine spaces.

The AKM2G-24D-ANDNCA00 is supplied without a holding brake, so external torque or a drive-based clamp must secure vertical loads during power-off. During service, the motor can run in environments up to 95 % relative humidity provided condensation is avoided, and its shaft end is machined as a smooth shaft for couplings that rely on friction locking rather than keys. Internal thermal protection combines a PT-1000 + PTC sensor pair, and the drive can read both devices to limit current before winding temperatures rise excessively. The encoder and thermal signals give the drive the information needed to regulate speed and protect the motor during operation.