Product Description:

The AKM2G-22E-ANDNCA00 is a servo motor manufactured by Kollmorgen for the AKM2G Magnetic Motors series. Classified as a standard-configuration unit, it requires no custom machining before installation. The rotor length code 2 provides a balanced torque-to-inertia ratio that favors agile starts and stops in multi-axis robots, labeling machines, and test fixtures. By embedding a smart feedback channel and matched thermal sensing in the stator, this motor enables precise closed-loop position control while maintaining the compact footprint demanded by modern cabinet layouts.

Environmental sealing is provided by an IP65 connector interface that resists dust ingress and low-pressure water spray. All power, signal, and ground cores are carried through a single HTEC M23 connector, simplifying harness design and reducing cable routing complexity. Coil temperatures are supervised by a PT-1000 + PTC pair; the linear platinum element feeds continuous temperature data to the drive, and the PTC acts as a discrete overtemperature switch. Mechanical integration is guided by the 58 mm frame size, giving a repeatable pilot diameter and bolt circle. Continuous operation is supported from 5 to 40 °C, matching typical control-room climates without derating.

The control loop relies on the SFD3 Smart Feedback Device Gen. 3, which transmits high-resolution position data and electronic nameplate information over the same cable used for power, eliminating separate encoder leads. Mounting is via an IEC flange with accuracy N, allowing the motor to bolt directly to standardized gearheads or mechanical adapters. The shaft is supplied as a smooth shaft, facilitating zero-backlash clamp couplings, and the unit comes without a holding brake to reduce inertia and overall length. Operation remains stable up to 95% relative humidity, enabling use in humid production areas such as washdown packaging lines.