Product Description:

The AKM2G-22C-ANDNCA00 is a servo motor built by Kollmorgen for the AKM2G Magnetic Motors series. It is delivered in the standard customization variant, so the motor uses the standard mechanical and electrical option set. The unit converts drive current into precisely regulated torque and speed, supporting indexing, positioning, and coordinated motion axes throughout automated machinery. This makes it suitable for motion tasks that require repeatable starts, controlled acceleration, and stable speed regulation in compact equipment sections.

This motor tolerates ambient air from 5–40 °C without derating, a band suited to most factory floors with controlled indoor conditions. Power and feedback conductors share a single 1 htec M23 connector whose threaded shell carries an IP65 ingress rating, protecting internal contacts during washdown splashes and routine cleaning exposure. The motor has a compact 58 mm frame diameter, and its rotor length of 2 balances inertia against peak torque demand in installations where space is limited. Position is returned through the digital SFD3 Smart Feedback Device Gen. 3, which provides the drive with electronic feedback for commutation and motion control. Winding temperature is monitored by a PT-1000 + PTC sensor pair, and the smooth shaft supports clamp-style couplings without a keyed interface.

Mechanical attachment follows the IEC with accuracy N flange pattern, so the housing centers precisely against gearboxes or machine plates. The motor ships without a brake, so holding torque at standstill must be provided by the drive or an external holding device when the application requires load retention. Continuous duty is permitted up to 95% relative humidity, provided condensation is avoided, which supports use in enclosed industrial spaces with elevated moisture levels. No additional gaskets or heaters are required when the motor operates within the stated ambient limits, keeping the installation straightforward and avoiding extra enclosure accessories.