Product Description

The AKM42G-EKC2C-00 synchronous servomotor by Kollmorgen along with a SERVOSTAR digital servo amplifier form a digital control system. This motor has ten pole pairs. The product features a climatic category of 3K3 as per EN 50178 specifications during operation. This device encompasses an electrically isolated thermistor in its windings. The unit features a torque constant of 0.74 Nm/A. It has a radial load of 450 N at the shaft end. This motor uses a shielded 4 x 1.5 motor cable. The product may have live power connections even when it is not rotating. The device related connectors must not be unplugged during operation. This unit offers no assurance of electrical safety without a low-resistance earth connection. Its shaft and flange are vulnerable during assembly and storage. The motor must have no liquid accumulation around the shaft with IM V3 mounting. This device supports a maximum installation altitude of 1000 m over sea level. The unit is not protected against heavy overload or short by the thermostat. This servomotor related holding brake is a standstill brake and is not recommended for repeated operational braking. The product has an increased length because of the holding brake. This device forms a closed torque or speed control loop with the SERVOSTAR servo amplifier. The unit assembly and wiring must be done by personnel qualified and trained in mechanical and electrical engineering. Its motor leads must be connected close to the servo amplifier. The motor connection cables must be selected in adherence to EN 60204 specifications. This product has a possibility of triggering EMC interference as a result of incorrectly installed shielding.