Product Description:

The AKMH53H-CCSNGE02 is a synchronous servo motor produced by Kollmorgen as part of the AKM Synchronous Servo Motors series. The unit converts commanded drive current into controlled rotary motion for indexing, tensioning, and point-to-point positioning tasks in automated machinery. Its HIPERFACE DSL single-cable feedback system reduces wiring by carrying feedback communication through the motor cable, which helps keep installation clean in packaging lines, robotics, and process equipment that require accurate speed and position control. This arrangement also reduces the number of separate connections at the motor housing and supports compact machine layouts where cable space is limited.

Under rated load, the motor delivers a continuous torque of 9.45 Nm while drawing 5.92 Arms of current. A phase-to-phase resistance of 2.1 ohms helps limit copper losses during steady operation and supports stable thermal behavior in continuous-duty service. For rapid acceleration, the drive can supply up to 19.8 Arms, which allows a short-term peak torque of 28.4 Nm. The rotor can reach a maximum mechanical speed of 6000 rpm, giving the motor enough speed for direct-drive or geared axes with fast cycle times. That operating range suits applications that alternate between steady torque demand and short bursts of higher output.

The motor uses an IEC face mount with a bolt circle diameter of 130 mm, allowing direct attachment to machine frames or gearheads. Its keyed shaft is 24 mm in diameter and extends 50 mm, and an 18-bit encoder provides feedback accuracy of ±1.33 arc-min for close alignment between commanded and actual shaft position. A special holding brake secures the load when power is removed, which is useful where the axis must remain in place at standstill. Two SpeedTec ready connectors simplify cable connection, and the 9.12 kg-cm² rotor inertia with length index 5 supports responsive indexing behavior during repeated motion cycles.