AKM65P-ANC2DB-00
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The AKM65P-ANC2DB-00 is a NEMA 42 synchronous servo motor with a double shaft configuration. Manufactured by Kollmorgen as part of the AKM Synchronous Servo Motors series, it features an MS connector system construction and supports an operating temperature range of -40 degrees C to 100 degrees C. The motor offers holding torque up to 1380 oz-in.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Kollmorgen AKM65P-ANC2DB-00 synchronous servomotor has a 24 VDC holding brake. This motor comprises three phases. The product does not have any radial shaft-sealing ring. This device related number of poles must be set in the servo amplifier. The unit incorporates an EQN1x25 system to provide feedback. The unit is likely to have live power and control leads for a brief period even after it has stopped rotating. Its DC link voltage must be measured and checked that it is below 40 V before the electrical connections are handled. This motor must be de-energized before it is assembled and wired.
The product must have an electrical connection with a large surface area between the mounting cabinet and itself inside the switch cabinet to prevent HF interference. This device should be provided with the correct EMC shielding and earthing. This unit has a PUR sheathing for its connection cables. Its holding brake cannot be used to ensure personnel safety. This motor setup should be done such that there is no accidental contact with moving and live parts when it is in the operation phase. The product has a release time of 105 ms and a delay time of 20 ms for the holding brake. This device features a 1K4 storage climate category as per EN 50178 specifications. The unit should be cleaned only on its housing. It should be ensured that the motor housing is always free of condensation.
This synchronous servomotor fails to operate properly if its phases are in the incorrect sequence. The product must never be installed at an altitude higher than 5000 m above sea level. This device depends on the servo amplifier to control the holding brake. The unit can be stored for an indefinite period. It must be disconnected from the power supply during maintenance.
Frequently Asked Questions about AKM65P-ANC2DB-00:
Q: What happens when the holding brake of the AKM65P-ANC2DB-00 servomotor is released?
A: The rotor of the AKM65P-ANC2DB-00 servomotor can be moved without a remnant torque when the holding brake is released.
Q: How does the cooling of the AKM65P-ANC2DB-00 servomotor take place?
A: The cooling of the AKM65P-ANC2DB-00 servomotor takes place by natural convection.
Q: What type of encoder is used for feedback for the AKM65P-ANC2DB-00 servomotor?
A: The AKM65P-ANC2DB-00 servomotor uses a multi-turn encoder for feedback.
Q: When does the holding brake of the AKM65P-ANC2DB-00 servomotor require additional wiring?
A: The holding brake of the AKM65P-ANC2DB-00 servomotor requires additional wiring when it is not controlled by the servo amplifier.
Q: How is the length of the AKM65P-ANC2DB-00 servomotor affected by the holding brake?
A: The length of the AKM65P-ANC2DB-00 servomotor is increased when the holding brake is mounted.
