Product Description:

The AKM65M-ANC2DA-00 is a servo motor manufactured by Kollmorgen as part of the AKM Synchronous Servo Motors series. This brushless unit is intended for precise position and velocity control in automated machinery such as pick-and-place heads, form-fill-seal stations, and multi-axis gantries. It operates in a closed loop with a drive controller so commanded motion profiles are reproduced with minimal following error. The motor’s electromagnetic design, mechanical interface, and feedback channel are coordinated to support high dynamic stiffness in a compact frame.

A factory-mounted 24 V holding brake keeps the load stationary when power is removed, making the motor suitable for vertical or indexing axes. Power and feedback are routed through two SpeedTec Ready connectors, which use keyed, quarter-turn collars for quick and reliable cabling. Rotor position is reported by an optical encoder that delivers 512/2048 lines/rev before electronic interpolation. The sensing module uses the EnDAT 2.1 encoder protocol so absolute position data and diagnostics travel on a bidirectional digital link. Because the measuring system is single-turn optical, one mechanical revolution is captured with high fidelity without the added complexity of multi-turn gearing.

The motor attaches to gearboxes or machinery through an IEC flange with accuracy N that aligns the stator to industry tolerances. Its square housing spans 138 mm across the mounting face, and rotor length index 5 extends the active stack to raise continuous torque without increasing diameter. A smooth shaft simplifies coupling alignment and supports high-speed operation. The electromagnetic circuit follows winding designation M, which matches phase resistance and back EMF characteristics to drives intended for moderate bus voltages and elevated current peaks. These electrical and mechanical features support accurate motion control across demanding automated applications.