Product Description:

The AKM63K-GNCNDA00 is a rotary actuator from the AKM Synchronous Servo Motors series produced by Kollmorgen. Intended for tightly regulated motion loops, this servo motor converts drive output into precisely metered torque and speed for indexing tables, pick-and-place heads, and other automated stations. Its construction and flange format allow installation where space is constrained yet dynamic positioning accuracy is required. Its synchronous design supports repeatable acceleration and steady low-speed control when paired with a suitable servo drive.

The motor uses an EnDAT 2.1 encoder with the ECN1113/1313 optical read head to return absolute position data. This feedback path supplies 512/2048 lines/rev of resolution for fine incremental moves without external sensors. This arrangement supports accurate commutation and position reporting during startup and normal motion. Inside the housing, a rotor with length index 3 spins in a 138 mm stator frame, giving a balanced inertia profile for mid-range load demands. A smooth shaft exits the front end, eliminating keyway wear in couplings. Electrical insulation and thermal ratings align with mid-power AKM applications.

The electrical interface uses two SpeedTec Ready connectors, and it is oriented by alternative flange variant G to simplify cable routing in tight cabinets. Factory assembly follows the standard customization level, so the motor uses the regular dimensional and thermal configuration for this model. Power delivery relies on winding code K, which is intended for balanced current density with compatible drives. Because the unit ships without a brake, any power-off holding must be handled by external mechanics or servo clamping. The connector layout keeps cable exits compact around the housing and leaves the drive-end coupling area unobstructed.