Product Description:

The AKM62K-ANCNDA00 is a servo motor produced by Kollmorgen for the AKM Synchronous Servo Motors series. Intended for closed-loop motion axes in packaging, electronics, and general automation, the unit converts drive current into precise torque and speed. A machine controller can use this controlled output to synchronize position, velocity, and acceleration without requiring mechanical gearing changes.

Electrical and mechanical interfaces use two SpeedTec Ready connectors, which simplify cable routing and reduce wiring errors during installation. Position data comes from an optical disk with a resolution of 512/2048 lines per revolution, and an EnDAT 2.1 encoder sends incremental and absolute values over a bidirectional channel. A smooth shaft delivers torque directly to clamping couplings without keyways, helping minimize backlash in precision stages. The overall frame width is 138 mm, matching the IEC 72 dimensional envelope so the motor fits compatible gearboxes or mounting brackets. The unit is supplied without a brake, so an external device must provide holding force whenever the axis is powered down. Its standard customization level indicates that the motor does not have special windings or mechanical alterations.

The feedback system provides single-turn optical operation, so the control system must handle multi-turn position retention when the application requires it. The internal magnetic stack corresponds to rotor length index 2, providing a mid-range continuous torque rating while keeping inertia moderate for fast acceleration. The stator copper uses winding designation K, which establishes the voltage constant used when pairing the motor with a compatible Kollmorgen drive. Mounting is handled by an IEC flange with accuracy N, providing the concentricity needed to meet coupling runout tolerances in most servo gearheads. The encoder hardware uses feedback type ECN1113/1313 and supports standard feedback cabling for the motor interface.