Product Description:

The AKM62H-ANCNDB00 is a synchronous servo motor produced by Kollmorgen within the AKM Synchronous Servo Motors series. As part of this electrically commutated family, it integrates into servo drives to provide precise torque, speed, and position control on packaging, pick-and-place, and material-handling axes. The compact 138 mm frame and electronic feedback enable high dynamic response, making it suitable for automated machinery that must synchronize multiple axes in real time.

Motion signals are measured by an optical encoder that delivers a resolution of 512/2048 lines/rev, which gives the controller sub-degree position visibility at both low and rated speeds. The sensing element communicates through the EnDAT 2.1 protocol, allowing digital interpolation and electronic nameplate data exchange. Because the encoder is of multi-turn design, it tracks mechanical revolutions without battery-backed counters, eliminating homing moves after power loss. Power and feedback cables attach through 2 SpeedTec Ready connectors; their quarter-turn bayonet form supports secure cable attachment while maintaining shield integrity in EMC-sensitive cabinets. Mechanical mounting follows an IEC flange with accuracy class N, allowing installation on standardized gearboxes or direct machine frames.

Inside the stator, winding code H indicates the copper fill and electrical impedance, pairing the motor with drive amplifiers that supply its rated voltage constant. The rotor stack follows length index 2, delivering moderate inertia for mid-range load profiles. A smooth shaft allows direct coupling to precision gearheads or timing pulleys without keyway stress concentrations, while the housing is supplied without a brake, so holding torque must be provided externally if the axis is gravity-loaded. Kollmorgen lists feedback type EQN1125/1325 and a standard customization level.