Product Description:

The AKM62G-ACC2DB00 is a synchronous servo motor manufactured by Kollmorgen for the AKM Synchronous Servo Motors series. It is designed to convert drive amplifier current into precise shaft torque and speed for automated equipment such as pick-and-place heads, printing cylinders, or dispensing pumps. Integrated feedback and braking hardware allow the control system to command rapid acceleration and secure holding without external devices. This makes the motor suitable for medium-power axes installed in compact machine frames.

Electrical and mechanical options determine how this motor connects to the rest of the motion chain. A 24 V holding brake immobilizes the rotor whenever power is removed, guarding against drift on vertical or load-bearing axes. Power, signal, and ground are routed through two SpeedTec Ready connectors, whose quarter-turn locking collars shorten installation time. Position data come from a 512/2048 lines/rev incremental channel integrated into an EnDAT 2.1 encoder that also carries the EQN1125/1325 absolute code stream. The motor uses the G winding designation, which provides a balanced current density for typical 400 VDC bus systems. This configuration is supplied at the standard customization level.

The feedback circuit tracks rotation over many revolutions through a multi-turn optical counting method, which eliminates the need for homing after power cycles. The motor uses IEC mounting with accuracy grade N, which helps align it concentrically with gearboxes or direct-drive loads, while the frame width of 138 mm fits machine spaces intended for size-62 housings. Torque is transmitted through a shaft with a keyway, which provides positive mechanical engagement under start-stop duty. This unit carries rotor length index 2, offering moderate inertia for balanced acceleration and stable motion during repeated cycling.