Product Description:

The AKM54L-CCC2LB00 is a synchronous servo motor produced by Kollmorgen within the AKM Synchronous Servo Motors series. It is sized for mid-range power handling and is applied as a torque source in positioning tables, carton erectors, and other closed-loop automation axes where fast response and consistent velocity are required. Its synchronous design supports accurate acceleration, steady low-speed motion, and repeatable stopping when it is paired with a compatible servo drive. This makes it suitable for packaging, indexing, and transfer applications that depend on short cycle times and consistent motion from one cycle to the next. The motor format also helps maintain compact axis layouts where installation space is limited.

This model includes a 24 V holding brake that clamps the shaft whenever power is removed, removing the need for external mechanical locks on vertical loads. Power and feedback wiring are handled through two SpeedTec Ready connectors, allowing keyed, tool-free cabling with simple connection and disconnection. Rotor position is captured at a resolution of 16/32 lines per revolution by an EnDAT 2.1 encoder, and the digital interface supplies absolute position data to the drive for immediate commutation after startup. The stator housing spans 108 mm across the frame, so the motor fits compactly against standard gearheads and machine plates. The motor uses a keyway shaft, which simplifies torque transfer to couplings and helps prevent slip under repeated reversals. The feedback element follows the EQI1130/1331 inductive standard, which tolerates oil mist and vibration better than optical disks. Internal windings follow designation L and are matched to the AKD drive family for current and voltage compatibility. The unit ships in the manufacturer's standard customization level, so no special seals or coatings are added.

A multi-turn inductive counter tracks revolutions beyond one full rotation, preserving machine zero after power loss. Mounting uses flange variant C, which provides metric pilot dimensions that align with legacy IEC gearboxes. Winding designation L pairs with rotor length index 4 to favor medium inertia, which helps support smooth low-speed contouring without placing a large regenerative load on the drive.