Product Description:

The AKM54K-CCCN2-00 is a synchronous servo motor manufactured by Kollmorgen as part of the AKM Synchronous Servo Motors series. Designed for tightly regulated industrial axes, the motor converts drive commands into rapid and accurate shaft movement. This makes it suitable for packaging heads, pick-and-place arms, and other automation equipment that demand repeatable torque and position control. Its synchronous design supports responsive motion during indexing, positioning, and other short-cycle tasks where stable feedback is important.

The unit is supplied without a brake, so holding torque during power-off must be handled by external mechanics or the drive itself. Power and feedback cables attach through two SpeedTec Ready connectors that lock quickly and maintain shielding continuity in high-vibration panels. A combined commutation and incremental sensor, identified by the Comcoder designation, provides rotor position data. Within that encoder, the optical disk offers a base resolution of 2048 lines/rev, and after quadrature processing this supports fine velocity loops at low speed. Because the sensing track is single-turn optical, position is referenced once per revolution. The signal format follows the EPC 15T profile, allowing direct connection to Kollmorgen AKD drives without additional interpolation electronics.

Mechanical interfaces follow the alternative flange variant C outline, giving a 94 mm pilot diameter and threaded holes that match ISO mounting patterns. The stator frame measures 108 mm across flats, providing a balance between thermal mass and footprint, while the rotor length index of 4 increases continuous torque without changing the cross-section. Shaft output is through a keyway for positive coupling to pulleys or couplings, and electromagnetic performance is tuned by winding designation K. This configuration uses the standard customization level, so form, fit, and electrical ratings stay consistent with the standard product version.