Product Description:

The AKM52K-SSCNS-M2 is a permanent-magnet servo motor produced by Kollmorgen within the AKM Synchronous Servo Motors series. It is intended to supply precise torque and speed control to automated machinery, allowing motion controllers to synchronize axes for packaging, semiconductor handling, or pick-and-place equipment. By integrating into closed-loop drive systems, the motor converts electrical power into regulated mechanical rotation that matches commanded profiles for position, velocity, and acceleration.

This model is supplied without a brake, so any load-holding duty must be handled by the drive or an external mechanical device. Power and feedback conductors terminate through two SpeedTec Ready connectors; these keyed plugs enable quick-lock wiring and simplify cable installation. The encoder channel uses a special feedback arrangement, allowing use with nonstandard resolution or protocol requirements while retaining the factory-installed sensor. A square frame size of 108 mm establishes the mounting dimensions, aligning the motor with medium-capacity gearboxes and direct-drive mounts. Inside the stator, winding code K corresponds to a particular turn count and wire gauge, which set the base voltage constant and suit drives operating at intermediate bus levels common in 400 V-class cabinets.

A special flange departs from the standard IEC pattern, allowing the motor to fasten directly to proprietary machine plates without adapters while maintaining concentricity. The rotor length index of 2 indicates a medium-length magnetic stack, balancing continuous torque output with moderate inertia for responsive starts and stops. Output torque is transmitted through a special shaft configuration, which may include a custom keyway or threaded end to accommodate an application-specific coupling.