Product Description:

The AKM52H-ANCNC-00 is a servo motor manufactured by Kollmorgen and supplied within the AKM Synchronous Servo Motors series. Designed for closed-loop motion platforms, the unit converts drive commands into shaft torque and speed for positioning tables, pick-and-place heads, and packaging axes in industrial automation lines. When paired with a compatible servo drive, it operates as a compact electromechanical actuator for precise axis control. The feedback system allows the drive to correct speed and position errors as load conditions change during operation. It is suited to synchronized machine sections where several axes must start, stop, and settle predictably within short cycle times.

Its mechanical section uses an IEC flange with accuracy N, allowing direct mounting to gearboxes or machine frames without alignment sleeves. Electrical power and feedback leave the stator through two SpeedTec Ready connectors, so keyed plugs lock with a quarter-turn connection and maintain shielding integrity. Motion is reported by an SFD sensor that transmits 4 lines of serial data. The measurement chain uses a single-turn inductive core, which eliminates optical disks and improves vibration tolerance. The motor is supplied without a brake, and its laminated stack diameter of 108 mm supports a moderate inertia profile. The encoder electronics are housed in a Size 10/15/21 format that matches standard cable sets and simplifies connection layout.

A smooth shaft reduces coupling runout and permits easy attachment of clamp hubs. The internal rotor stack uses index 2, which balances inertia and power density for medium torque requirements. The motor uses winding code H, which suits voltage classes common to 230 VAC drives. It is supplied at the standard customization level, and the base configuration fits general automation equipment without special options.