AKM44G-AND2C-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKM44G-AND2C-00 is a synchronous servo motor from the AKM Synchronous Servo Motors series with a frame dimension of 84 mm and smooth shaft design. It features a 24V holding brake and uses an SFD feedback system with 4 lines. The motor includes an IEC flange with accuracy N and supports either an i-tec Hybrid or SpeedTec Ready Hybrid connector.
Internal Product Review
The AKM44G-AND2C-00 is a Kollmorgen AKM synchronous servo motor with an IEC flange configuration and a smooth shaft. SFD feedback with single-turn inductive operation supports clean position feedback for precise motion control. A 24V holding brake rounds out a well-engineered motor package for disciplined servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKM44G-AND2C-00 is a synchronous servo motor produced by Kollmorgen within the AKM Synchronous Servo Motors series. It converts electrical energy from a matched drive into controlled rotary motion for indexing tables, pick-and-place heads, and other axes that require repeatable positioning. Its compact frame and IEC flange geometry allow the unit to mount directly to compatible gearboxes or mechanical loads without custom adapters. The permanent-magnet design supports responsive torque control, while electronic commutation allows the connected drive to regulate speed and position throughout repeated motion cycles.
This model incorporates a 24 V holding brake that clamps the rotor whenever power is removed, preventing back-driving on vertical or suspended loads. A smooth shaft transfers torque through clamp or compression couplings while eliminating stress concentrations associated with a keyway. The housing has a width of 84 mm, providing dimensions that match Kollmorgen size 4 frame accessories. Power, signal, and brake leads terminate in a single i-tec Hybrid or SpeedTec-ready Hybrid connector, reducing field wiring to one plug-in interface. Mounting uses an IEC flange with accuracy class N, providing the pilot dimensions and concentricity tolerances needed for alignment with precision gear stages.
Servo feedback is supplied by the SFD resolver-based feedback device, which reports rotor position through a single-turn inductive measurement. The feedback signal provides 4 lines of digital resolution to the drive for commutation and closed-loop motion control. The motor uses winding code G, providing voltage constants suited to medium bus voltages while balancing current demand and thermal rise. A rotor length index of 4 extends the magnetic stack to increase continuous torque without changing the frame dimensions. The feedback hardware uses the size 10/15/21 format, supporting the corresponding feedback assembly dimensions. The motor has a standard customization level, so it uses the regular mechanical and electrical configuration for this model.
