Product Description:

The AKM44E-ANC2R-00 is a permanent-magnet servo motor built by Kollmorgen and assigned to the AKM Synchronous Servo Motors series. In automated cells, it acts as a torque source for indexing tables, form-fill-seal equipment, and compact Cartesian stages. The motor converts commanded drive current into controlled rotary motion for positioning tasks and speed-regulated axes. By combining a short axial length with an embedded brake circuit, it fits drive trains that need accurate velocity and position regulation.

Mechanical interface and electrical safety are addressed by the integrated 24 V holding brake, which locks the rotor whenever bus voltage is removed. Power, signal, and protective earth conductors enter through two SpeedTec Ready connectors, each fitted with a bayonet coupling that supports tool-free rotation and straightforward cable routing. Motion feedback is derived from a resolver that tolerates high vibration and temperature swings, and the sensing package is secured within an IEC flange with accuracy class N to align the stator precisely on machine frames. The square housing measures 84 mm across, and the rotor length index 4 increases active core depth for higher continuous torque. The size 10/15/21 electronics and winding designation e are matched to standard Kollmorgen drive operation.

The mechanical output end features a smooth shaft that supports clamp collars or compression couplings without keyway stress. Commutation tables are referenced against a feedback resolution of 2 poles, while position is reported by a single-turn inductive measurement cycle that supplies absolute angle within one revolution. The configuration is standard, and no special seals or coatings are applied. This arrangement supports general machine installations that do not require added surface protection or special environmental sealing.