AKM42G-ANCN2-00
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Kollmorgen AKM42G-ANCN2-00 synchronous servomotor is used in a drive control system along with a SERVOSTAR servo amplifier. This motor has no customization. It has a G type winding.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Kollmorgen AKM42G-ANCN2-00 synchronous servomotor is delivered with a smooth output shaft. This motor is associated with a nameplate that is attached to its housing on the side. The product offers no support to retrofit its holding brake. This device has a three-phase winding in its stator and permanent magnets in its rotor. The unit must ideally be used with double-coned collets as they deliver zero backlash coupling. Its comcoder feedback device is an incremental encoder with commutation and a resolution of 500 to 10,000 lines. This motor has 10 poles. The product has an increased length because of the feedback unit and the holding brake. This device installation must be done taking care to ensure that there is unhindered ventilation. The unit comprises a locking thread that must be used to tighten the gear or pulley wheels and warm the drive components. Its pole count must be correctly set in the related servo amplifier. This motor must be checked to confirm that it is de-energized at the time of assembly and wiring. The product must be used only with a servo amplifier that matches in terms of current and voltage. This device is supposed to make use of only the manufacturer's preassembled cables for its power connection. The unit is intended to be commissioned only by personnel with extensive knowledge of electrical engineering. Its rotor must be checked for free revolution at the time of setup. This servomotor wiring must be done exactly as shown in the wiring diagram. The product may show no signs of rotation if its holding brake is not released. This device related standstill current has a sinusoidal format.
Frequently Asked Questions about AKM42G-ANCN2-00:
Q: What is the maximum bus voltage of the AKM motor?
A: The maximum bus voltage of the AKM motor is 640 VDC.
Q: Where are the permanent magnets of the AKM motor located?
A: The permanent magnets of the AKM motor are located in its rotor.
Q: Does the AKM motor perform commutation during operation?
A: No, the AKM motor does not perform commutation during operation as it has a brushless design.
Q: Can the control and power cables of the AKM motor be routed close to each other?
A: No, it is not advisable to route the control and power cables of the AKM motor close to each other as this can trigger interference.
Q: Are the ball bearings of the AKM motor lubricated?
A: Yes, the ball bearings of the AKM motor are lubricated with a grease packing that lasts for 20,000 operating hours.
