Product Description:

The AKM42E-ANCNR-00 is a Kollmorgen servo motor from the AKM Synchronous Servo Motors series that drives rotary axes in industrial automation. When paired with a digital drive, it delivers controlled torque and speed for pick-and-place heads, indexing tables, and packaging mandrels that must stay aligned with machine timing. Its electromagnetic design supports dynamic positioning, and the compact housing helps the motor fit inside tightly packed machine frames. This makes it suitable for motion tasks that need repeatable acceleration, deceleration, and stable velocity control across short machine cycles.

The motor is supplied without a brake, so holding force must be provided by the drive or an external clamp during power-off stops. Power and feedback lines connect through 2 SpeedTec Ready connectors, a keyed arrangement that locks with a quarter turn for quick cable attachment. Shaft position is reported by a resolver, an inductive transducer that tolerates vibration and temperature swings. Internally, the electromagnetic field is commutated over 2 poles, which balances torque density and electrical frequency. The motor uses an IEC flange with accuracy N, and the overall stator width of 84 mm keeps the package compact and helps limit reflected inertia on high-speed axes. This mounting pattern supports accurate face installation on standard machine plates and couplings.

Feedback is absolute over single-turn inductive sensing, so position is available again after a reset without requiring a full revolution count. The sensing module is classified as Size 10/15/21, matching compatible drive electronics, and the motor uses a smooth shaft for couplings, clutches, or timing pulleys that do not require a keyway. The electromagnetic winding follows designation e, and rotor length index 2 indicates a stack height suited to moderate continuous torque without increasing the frame diameter. The motor is supplied in a standard configuration rather than a special custom build.