Product Description:

The AKM41H-ACC22-00 is a brushless AC servo motor manufactured by Kollmorgen as part of the AKM Synchronous Servo Motors series. It couples a permanent-magnet rotor with integral feedback to generate controlled torque and speed for industrial axes. The model is applied wherever coordinated, closed-loop motion is required, such as multi-head pick-and-place stations, indexing conveyors, and small gantries. Its construction lets it fit into tight mechanical envelopes while still delivering the dynamic response demanded by modern automation controllers.

Mechanical safety is handled by a 24 V holding brake that locks the shaft when the drive is disabled, preventing back-driving on vertical or indexing loads. Field wiring is simplified by two SpeedTec Ready connectors, which separate power and signal with keyed, rapid-latch housings. Inside the rear housing, a Comcoder provides 2048 lines/rev of incremental position data. Because the sensor is a single-turn optical encoder, each revolution is reported uniquely without additional gearing. This feedback supports tight servo loops while keeping the motor length unchanged.

The physical interface follows an IEC flange with accuracy N, allowing the motor to mate with planetary gearheads or machine plates without aligning pins. An 84 mm frame dimension sets the square outline, while the rotor length index of 1 keeps overall depth moderate for compact equipment. Output torque is transferred through a keyway shaft, a detail that secures pulleys or couplings against slip under cyclic loads. Electrical behavior is shaped by the H winding designation, which matches this frame size to medium bus voltages, and the feedback type EPC 15T links the sensor electronics to Kollmorgen drive parameters. The motor is supplied in the standard customization level.