AKM33E-ANC22-00
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen AKM33E-ANC22-00 synchronous servomotor encompasses a 24 VDC holding brake. This motor has a peak current rating of 10.3 A. It features a rotor length of 3.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Kollmorgen AKM33E-ANC22-00 synchronous servomotor operates in unison with the manufacturer's SERVOSTAR servo amplifier. This motor features a standstill spring-applied holding brake. The product has a rotor length of 3. This device can be mounted horizontally and vertically. The unit and the servo amplifier should be commissioned individually in multi-axis systems. Its flange is sized at 70 mm. The motor highlights a brake related error message if there is a short circuit in the supply voltage lead to the holding brake. This product renders smooth performance because of the low harmonic distortion. The device has two right-angled Intercontec connectors. This unit has a reduced torque by 0.2 Nm because of the holding brake and non-resolver feedback option. It must be assembled, set up, maintained, operated and transported by only properly qualified personnel. Its comcoder feedback cable has a cross-section of 8 x 2 x 0.25. The motor is not equipped with an in-built fan. This product should not be sprayed with or immersed in liquid for cleaning. The device has a locking thread that is used to tighten its pulley or gear wheels. This unit is equipped with additional wiring if its holding brake is not controlled by the SERVOSTAR servo amplifier. Its shaft and flange are prone to damage due to blows or the use of brute force. The servomotor cannot be operated in environments with caustic acids and bases in the surroundings. This product has a thermal sensor in its windings. The device features a maximum stacking height of six units. This unit has no negative impact on the surroundings with its operation.
Frequently Asked Questions about AKM33E-ANC22-00:
Q: What kind of finish does the AKM motor housing have?
A: The AKM motor housing has a matt black enamel finish.
Q: What kind of packaging must be used to store the AKM motor?
A: The AKM motor must be stored in the manufacturer's original recyclable packaging.
Q: Does the AKM motor have a radial shaft seal?
A: No, the AKM motor does not have a radial shaft seal and hence there is no increased protection.
Q: Is it possible to use the AKM motor without a ground connection?
A: No, it is not possible to use the AKM motor without a ground connection and this connection must be done to the protective earth busbar in the switch cabinet.
Q: Why must the power and control cables of the AKM motor be routed as far as possible from each other?
A: The power and control cables of the AKM motor be routed as far as possible from each other to enhance the immunity of the system to electromagnetic interference.
