Product Description:

The AKM32D-ANCNC-00 is a servo motor produced by Kollmorgen within the AKM Synchronous Servo Motors series. It belongs to the AKM32 frame class and is used in industrial automation for accurate positioning and speed regulation on packaging lines, material-handling axes, and small machining centers. By converting controlled current from a matched servo drive into rotary motion, the unit delivers precise torque directly to coupled loads. Its compact format suits machine sections where mounting space is limited but stable motion and repeatable response are still required.

The electromechanical interface is simplified by 2 SpeedTec Ready connectors, which separate power and feedback wiring and allow keyed, quarter-turn coupling. Position data travel over SFD; the motor provides 4 lines of incremental signals plus an index, and the single-turn inductive sensor captures the absolute angle within one revolution. The motor is engineered without a brake, so the rotor can back-drive when it is de-energized and static load retention must be handled externally. Separate connector paths also help keep the cable arrangement clear in tightly spaced machine sections.

Mechanically, the motor mounts through an IEC flange with accuracy class N and uses a frame side length of 70 mm, which suits compact automation stages. The rotor length index is 2, giving a moderate magnetic stack that balances inertia with continuous torque capability. Output torque is transmitted through a smooth shaft, so couplings rely on friction or clamp hubs rather than keyways. Internally, copper fill and lamination geometry conform to winding D, which sets the voltage constant, current draw, and heat dissipation used by compatible Kollmorgen amplifiers. The flange layout supports accurate alignment to couplings, gearboxes, and machine plates, and the motor uses the standard customization level without special sealing or machining.