Product Description:

The AKM32C-ACC2R-01 belongs to the AKM Synchronous Servo Motors series produced by Kollmorgen. As a compact synchronous servo motor, it combines permanent-magnet torque production with closed-loop feedback to drive indexing tables, pick-and-place arms, and packaging axes that require precise speed and position control. This model sits in the 32 frame group, uses winding code C, and carries a rotor length index of 2, giving it a balanced mix of continuous torque density and moderate thermal mass for general automation duty. Its compact proportions also help it fit machine layouts where axis spacing is limited and moving mass must be kept under control.

The motor uses 2 SpeedTec Ready connectors, and these bayonet-lock interfaces allow power and feedback cables to be attached without tools. Position retention during power loss is provided by the integrated 24 V holding brake, which supports axes that must remain in place when control power is removed. A fitted shaft seal helps limit dust or oil ingress along the shaft journal during operation. Rotor electrical alignment is measured over 2 poles by a resolver, producing analog sine-cosine signals that remain stable in the presence of vibration and heat. The C winding supports standard bus voltages while keeping resistive losses low during repeated motion cycles.

Downstream drives read a single-turn inductive position signal from the feedback package, so applications that use homing routines do not require a multi-turn counter in the motor. Mounting follows an IEC flange with accuracy class N, helping the stator align correctly with machine plates or gearheads. The stator diameter of 70 mm supports a favorable torque-to-inertia ratio without enlarging the machine envelope, and the output shaft uses a keyway for positive coupling to pulleys or hubs. Feedback hardware is supplied in Size 10/15/21 format, and the interface follows common SpeedTec mechanical conventions for compact servo installations.