Product Description:

The AKM2G-33PLACC22-00 is a synchronous servo motor produced by Kollmorgen within the AKM Synchronous Servo Motors series. As a closed-loop actuator, it converts electrical energy into precisely regulated motion for positioning tasks in assembly lines, packaging machinery, and robotics. The model follows the International Standard mount pattern so it fits existing mechanical layouts without custom brackets, and its compact 58 mm frame dimension allows dense installation in multi-axis systems.

For feedback, the motor uses a commutating encoder that delivers an optical resolution of 2048 lines, enabling accurate commutation and fine incremental position data. When supplied from a 96 VDC drive, it achieves a rated mechanical output of 1.50 kW at a rated speed of 4700 rpm while producing 3.06 Nm of continuous torque. Without derating, the rotor can accelerate to a maximum speed of 8000 rpm, a figure matched to high-throughput automation. At zero speed, the motor provides a stall torque of 3.83 Nm, and thermal protection is handled by an integrated PT-1000 sensor combined with a PTC element that reports winding temperature directly to the drive.

Dynamic events such as indexing or rapid starts are accommodated by a peak torque reserve of 14.6 Nm, which the servo can deliver repeatedly as long as the winding current stays below the stall limit of 20.0 Arms. The power stage must also respect a bus voltage ceiling of 170 VDC to avoid over-excitation, while the holding brake circuit requires 24 VDC for reliable engagement during shutdowns. Twin SpeedTec M23 connectors route power and feedback signals, and the sensor-ready housing keeps noise low by referencing the commutating encoder signals directly to the digital controller.