Product Description:

The AKM24F-ENBN2-01 servo motor is manufactured by Kollmorgen and belongs to the AKM Synchronous Servo Motors series. It is a brushless synchronous unit intended for closed-loop control of industrial axes, converting electrical energy into repeatable rotational torque and speed for conveyors, pick-and-place modules, and packaging equipment. The motor supports applications that need accurate starts, stops, and speed changes across repeated operating cycles. Because the design follows IEC mounting conventions, it fits modular machine frames and multi-axis gantries without unusual adapter hardware.

Mechanically, the motor is built on a 58 mm frame, and rotor length index 4 increases the active lamination stack to support higher continuous torque without changing the mounting bolt circle. This format helps when machine layouts require a compact motor body with predictable mounting geometry. Power, feedback, and thermal conductors exit through 2 SpeedTec Ready connectors, which simplify routing in tight enclosures and allow separate connection paths for the motor interfaces. The output end uses a smooth shaft, and the housing is supplied with a shaft seal to protect the front bearing area from debris. The unit is supplied without a brake, so any static holding function must come from external mechanics or drive torque. The winding uses designation F, which corresponds to electrical characteristics matched to AKD drives.

Position feedback is handled by a Comcoder that integrates an EPC 15T optical sensor. This encoder provides 2048 lines/rev of base resolution and operates as single-turn optical feedback, so the controller receives absolute position within one mechanical revolution. That arrangement supports accurate commutation and stable velocity regulation across the operating range. The encoder's digital output helps the drive reduce tracking error during rapid indexing, reversals, and other dynamic motion tasks.