AKM24D-CKCN2-00
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The AKM24D-CKCN2-00 Kollmorgen synchronous servomotor has two stacks. This motor has no customization. It has two straight M23 Intercontec connectors on 0.5 m shielded leads.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Kollmorgen AKM24D-CKCN2-00 synchronous servomotor forms a closed speed and/or torque control loop in a drive control system along with a SERVOSTAR servo amplifier. This motor is one of the various brushless DC motors in the AKM series. The product has no holding brake. This device comprises a temperature sensor in its stator windings to monitor their temperature. The unit portrays a RAL 9005 enamel finish on its housing. It adopts IM B5 style as the basic mounting style. This motor has a keyway shaft on its A side. This product is not protected against heavy overloading or shorting through the integrated PTC. This device depicts vibration class N according to DIN EN 60034-14 specifications. The unit can be commissioned with minimum effort. Its flange is mounted according to alternative IEC standards. This motor has no radial shaft seal around the shaft. The product portrays a static friction of 0.01 Nm. This device has six poles. The unit is equipped with three phases. It is likely to start oscillating if the servo amplifier gain is too high. This servomotor and the servo amplifier must be commissioned individually in multi-axis systems. The product orientation and assembly must be checked during its setup process. This device has a high and dangerous electrical voltage of up to 900 V on its connection points when it is in use. The unit has a polyurethane sheathing identified by the 11Y code. It may cause EMC interference because of incorrectly installed shielding. This motor associated power connections should be done using only the manufacturer's shielded preassembled cables. The product should be in de-energized mode when it is being wired and assembled.
Frequently Asked Questions about AKM24D-CKCN2-00:
Q: What is the proportion of the peak current of the AKM motor with respect to its rated current?
A: The peak current of the AKM motor is approximately four times its rated current.
Q: Where is the three-phase winding of the AKM motor located?
A: The three-phase winding of the AKM motor is located in its stator.
Q: Can the axial force of the AKM motor exceed its radial force?
A: No, the axial force of the AKM motor cannot exceed its radial force and must not be more than one-third of the radial force.
Q: Can the AKM motor be stacked one on top of the other?
A: Yes, the AKM motor can be stacked one on top of the other and supports a maximum stacking height of 10 units.
Q: When must the ball bearings of the AKM motor be replaced?
A: The ball bearings of the AKM motor must be replaced as soon as grinding noises are heard or the bearings have completed 20,000 hours of operation under rated conditions.
