AKM23F-BNBN2-00 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKM23F-BNBN2-00 is part of the AKM Synchronous Servo Motors series and features a NEMA flange configuration with a frame dimension of 58mm. This standard motor is equipped with two SpeedTec Ready connectors and comes with a smooth shaft. It uses a Comcoder feedback system with a resolution of 2048 lines per revolution and supports single turn, optical feedback type EPC 15T.
Internal Product Review
The AKM23F-BNBN2-00 is a Kollmorgen AKM synchronous servo motor with a NEMA flange and smooth shaft. The Comcoder feedback system with 2048 lines/rev supports accurate motion control and consistent position feedback. A standard configuration with 2 SpeedTec Ready connectors makes the motor a strong choice for streamlined machine integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKM23F-BNBN2-00 is a brushless servo motor produced by Kollmorgen in the AKM Synchronous Servo Motors series. It is intended for precise rotary motion in automated equipment where the drive closes the current, speed, and position loops during repetitive cycles. Because the motor uses a brushless design, it avoids mechanical commutator wear and supports clean operation in applications that demand stable response over long production runs. Typical uses include packaging lines, small gantries, and semiconductor handling equipment that require accurate torque and speed control.
The mounting interface follows the NEMA 23 pattern, allowing direct installation where that pilot and bolt circle are required. A housing span of 58 mm keeps the motor compact for closely spaced multi-axis layouts while maintaining enough stator width for the assigned rotor geometry. Position data are generated by a Comcoder, whose incremental channel provides 2048 lines/rev through an EPC 15T glass disk while its optical section supplies single-turn absolute information. This combination supports accurate commutation after startup and helps reduce following error when the axis is commanded through rapid changes in speed or direction.
Field wiring is completed through 2 SpeedTec Ready connectors that rotate and lock with a quarter turn for secure cable attachment and straightforward routing in compact machine spaces. Output torque reaches the load through a smooth shaft, which is well suited for clamp-style couplings and other friction-based hub connections. The motor is supplied without a brake, so an external holding method is needed if the load must remain fixed during power loss or a stopped condition. Its stator uses an F winding intended for moderate bus voltages, balancing resistance and inductance for continuous-duty operation.
