Product Description:

The AKM22C-BNCNC-01 is a synchronous servo motor manufactured by Kollmorgen within the AKM Synchronous Servo Motors series. In automated machinery, it supplies commanded torque and speed so motion controllers can hold position, accelerate tooling, or follow trajectory profiles with high repeatability. Its compact design makes it suitable for small motion axes where accurate rotary output and consistent response are required in limited installation space.

This model is built without a brake, so holding torque during power-off must be provided externally. A NEMA flange supports attachment to gearboxes or direct-drive frames, while the compact 58 mm frame width fits installations where available space is limited. Rotary power is transmitted through a smooth shaft, and the front housing includes a shaft seal to help limit dust or oil ingress. Electrical connections use 2 SpeedTec Ready connectors, and the keyed layout helps prevent power and feedback lines from being cross-connected. The rotor length index is 2, which gives moderate inertia for small conveyors and pick-and-place axes. Internally, winding designation C matches drive stages used with typical midrange DC bus voltages and supports continuous-duty thermal performance.

Position data is delivered by an SFD feedback package that provides 4 feedback lines of incremental information for commutation and velocity loops. The sensor is a single-turn inductive device, so feedback does not rely on optical elements and remains stable in dusty areas or under light vibration. The feedback package uses Size 10/15/21 dimensions for the connector interface, which supports compatibility with established mating hardware. This motor is suited for packaging, labeling, and semiconductor handling equipment where short-cycle motion and repeatable servo control are required.